Credit Card Merchant Services
>

Enter Your Email To Sign Up
For Our E-Newsletter:


You are here: Home > Turbo Accessories > Boost Controllers
Sort By:
Page of 1
Turbo Smart Boost Tee Boost Controller
Our Price: $77.00

Smaller and lighter than other Manual Boost Controllers on the market. Set your boost and forget it. Boost adjustable from under the hood with an accurate, proven Detent System. Easy to install and adjust.

The Turbosmart Gated Boost Control Valve range is one of the best dollar for horsepower upgrades that you can make to your turbocharged petrol or diesel engine vehicle.

All Turbosmart Gated Boost Controllers feature our exclusive Gate feature which minimizes wastegate creep and can improve turbo response by up to 800 rpm earlier in the rev range – this means that you can increase the performance and response from your engine without even raising the maximum boost level.

Stable increases in boost over wastegate spring pressure of 200%+ for internal wastegate and 100% for external wastegates are common practice using our manual boost controllers.

Manufactured from high-grade brass and billet aluminium and are renowned for their easy installation, robust design, stability and our detent adjustment system allows for accurate and simple tuning of boost pressure.

The Turbosmart Gated Boost Control Valve range is ideal for mildly modified turbocharged engines and perfect for increasing boost levels on factory turbo cars and turbocharged engines.

Turbo Smart In Cabin Boost Controller
Our Price: $128.00

Control the boost from the driver’s seat. Ideal for the active enthusiast who wants boost adjustment on the run. Detent System makes adjusting a breeze. Gated System brings boost on faster.

The Turbosmart Gated Boost Control Valve range is one of the best dollar for horsepower upgrades that you can make to your turbocharged petrol or diesel engine vehicle.

All Turbosmart Gated Boost Controllers feature our exclusive Gate feature which minimizes wastegate creep and can improve turbo response by up to 800 rpm earlier in the rev range – this means that you can increase the performance and response from your engine without even raising the maximum boost level.

Stable increases in boost over wastegate spring pressure of 200%+ for internal wastegate and 100% for external wastegates are common practice using our manual boost controllers.

Manufactured from high-grade brass and billet aluminium and are renowned for their easy installation, robust design, stability and our detent adjustment system allows for accurate and simple tuning of boost pressure.

The Turbosmart Gated Boost Control Valve range is ideal for mildly modified turbocharged engines and perfect for increasing boost levels on factory turbo cars and turbocharged engines.

Turbo Smart Dual Stage Boost Controller
Our Price: $195.00

Fast boost response with two adjustable boost levels. Toggle between high and low boost on the fly. Ideal replacement for factory boost controllers. Both high and low boost settings are fully adjustable.

All Turbosmart Gated Boost Controllers feature our exclusive Gate feature which minimizes wastegate creep and can improve turbo
response by up to 800 rpm earlier in the rev range – this means that you can increase the performance and response from your engine without even raising the maximum boost level.

Stable increases in boost over wastegate spring pressure of 200%+ for internal wastegate and 100% for external wastegates are common practice using our manual boost controllers.

Manufactured from high-grade brass and billet aluminium and are renowned for their easy installation, robust design, stability and our detent adjustment system allows for accurate and simple tuning of boost pressure.

The Turbosmart Gated Boost Control Valve range is ideal for mildly modified turbocharged engines and perfect for increasing boost levels on factory turbo cars and turbocharged engines.

- See more at: http://www.turbosmartdirect.com/Product-Categories/Manual-Boost-Controllers/Dual-Stage-Boost-Controller-Blue.html#sthash.8y73lBoj.dpuf
Turbo Smart E-Boost Street 40PSI
Our Price: $285.95

Racing technology for the street
E-Boost STREET is an electronic boost controller aimed at the street performance market. It features many boost control capabilities found on its big brother – the e-Boost2, continuing the e-Boost tradition of providing class-leading boost control, value for money and no nonsense features. New features include 40psi max boost operating pressure and an auxiliary output.

FEATURES:
• 2 Boost Settings: easily selected via the “turn-and-push” button. An external switch can also be used to change between boost groups if required.

• Boost Correction Factor: eliminates boost drop off at high RPM.

• 3 Segment Display: with adjustable brightness can be configured for PSI, KPa, or BAR and will flash when warning of over boost shutdown or rev limit, allowing the unit to be used as a boost gauge, tachometer, or a shift light.

• Maximum Boost Level: 40PSI / 2.72BAR.

Supplied With:
e-Boost STREET control unit, Wiring loom + installation kit, Solenoid with mounting bracket and vacuum fittings, vacuum hose and hose clamps.

AEM Tru-Boost Gauge Controller
Our Price: $299.99

The TRU-BOOST boost controller gauge includes an on-board 29 PSIg pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting and a low-side output for a warning light. A 75 PSIa boost sensor for high boost applications is sold separately (please see TRU-BOOST 5 BAR Ugrade Kit).

AEM’s boost control solenoid is included with the TRU-BOOST controller gauge. It is specifically manufactured for automotive boost applications and will not corrode and stick from exposure to rich fuel mixtures or oil vapor. It is pressure tested to 100 psi and includes barbed fittings and -4 AN fittings to eliminate any chance of leaks.

  • No external interface required for programming!
  • Two user selectable boost settings with peak boost memory
  • Scramble boost setting allows user to momentarily change boost levels
  • User configurable gauge includes 24 scalable LEDs
  • Interchangeable black and white bezel, black and silver pin guide and black and white faceplate to customize look of display
  • One (1) low-side output included for warning lights
  • 52mm gauge diameter
Innovate Boost Controller & Wideband O2 Gauge
Our Price: $345.99

The Innovate Motorsports SCG-1 is a revolutionary approach to boost control that integrates an advanced standalone boost controller with Innovate’s industry leading DirectDigital™ wideband air fuel ratio technology. When we decided to build a boost controller, we knew we had to offer more capabilities than other products available today, while still maintaining the user friendly functionality demanded by our customers. Instead of repackaging the same boost control technology that has been used for decades, we choose to pair our advanced O2 sensor control technology with our all-new, proprietary solenoid control that provides superior boost control accuracy, response and safety. We also added a user programmable shift light and housed the entire package in a compact gauge body for ease of installation and use. As with all of our air/fuel ratio products, the SCG-1 utilizes our 100% digital wideband air/fuel ratio technology to provide real time feedback to the SCG-1. This air/fuel information is displayed on an integrated OLED display along with manifold pressure and wastegate duty status. The air/fuel ratio information is also used to provide a user definable boost cut that enhances the safety margin over most competitors offerings that only rely on over boost threshold. The SCG-1 has a full-programmable analog output ideal for applications using standalone ECU’s, piggy-back ECU’s or external data loggers. The SCG-1 also has a digital input/output for integration with our other Modular Tuning System (MTS) devices. This same digital output can be used to record air/fuel ratio, solenoid duty cycle, engine speed and manifold pressure with our free LogWorks PC software to help you dial in a perfect boost curve.

  • All-in-one, intelligent boost control and wideband air/fuel ratio gauge
  • Controller and display housed in 52mm (2 1/16”) diameter gauge body
  • Interchangeable faceplates & bezels: Black & silver bezel, black & white faceplates included
  • No PC required for configuration
  • OLED user configurable display
    • Boost, shift light, Air/Fuel ratio
    • AFR or Lambda, inHG, PSI, kPa, or BAR
  • Includes high resolution solenoid
  • 4 BAR map sensor, pressure range -29 inHG to 43.5 PSI (-1 to 3 BAR)
  • User programmable boost cut safety using Air/Fuel and Pressure references
  • Programmable solenoid duty cycle with separate gain control function
  • Peak hold function
  • Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology!
  • Wideband O2 Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more)
  • Ability to calibrate O2 sensor for maximum accuracy
  • Configurable linear 0-5v analog output for wideband O2 for use with piggy back or stand alone ECU’s as well as external data loggers
  • Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels)
  • 4 channels of log-able data with powerful LogWorks PC Software (MAP, RPM, A/F, WG duty)
SCG-1: Solenoid Controller Kit - includes the SCG-1 gauge, Wideband oxygen O2 sensor, 8 ft sensor cable, O2 sensor weld-on bung, 4 BAR Map sensor, Solenoid w/bracket, Vacuum hose kit, Black/Silver bezel, Black/White faceplate, Serial program cable, & Installation manual. P/N: 3882
   
 

Copyright ©  Stevebilt. All Rights Reserved. Built with Volusion